---
title: "Bespoke Gate Design & Manufacture in Chigwell"
description: "Custom gate design and manufacture with automation integration. Built to your entrance requirements and installed with full safety compliance."
canonical: "https://www.chigwellelectricgates.co.uk/services/bespoke-gate-design-manufacture"
lastmod: "2026-11-14T09:37:58.100Z"
---

# Bespoke Gate Design & Manufacture in Chigwell

![A modern black slatted metal driveway gate between brick pillars in front of a red brick residential house.](https://utmost-ibex-736.convex.cloud/api/storage/72a9c58f-1007-4cb1-91a7-ac21a35d4210)

A gate made to your exact entrance, right dimensions, right material, automation ready from day one.

- **Site Survey Arranged**: Your entrance is measured before fabrication begins.
- **DHF & Gate Safe**: Safety edges and photocells specified to DHF and Gate Safe standards.
- **Steel, Aluminium & Iron**: Material chosen to suit your entrance, not the other way round.
- **Automation Designed In**: Motor compatibility is specified at design stage, not retrofitted.

## Where bespoke gate projects go wrong, and how to avoid it

The problems that cause gates to stick, bind, or fail to automate cleanly are almost always decisions made before fabrication, not after.

- **Unmeasured Opening**: A gate ordered without a site survey often arrives a few centimetres out, leaving gaps or forcing the posts to be moved at extra cost.
  **Survey Before Fabrication**: Opening width, ground clearance, and post positions are checked on site so the gate is fabricated to the actual entrance, not an estimate.
- **Wrong Material Weight**: A gate that is too heavy for the chosen motor will strain the operator, wear out faster, and may fail force-testing under DHF standards.
  **Material & Motor Matched**: Leaf weight and motor specification are decided together at design stage, so the gate operates within the operator’s rated load from day one.
- **Automation Retrofitted**: Adding a motor to a gate not designed for it often means wrong hinge positions, no mounting points, and a gate that binds under power.
  **Automation Built In**: Hinge specification, motor mounting points, and swing clearance are designed into the gate from the start, not bolted on as an afterthought.
- **Uneven Ground Ignored**: A gate hung on sloped or uneven ground without accounting for the gradient will drag, fail to latch, or swing unevenly under power.
  **Ground Level Checked**: The site measurement includes a ground level check so the gate leaf profile and clearance are shaped to suit the actual slope of the entrance.

## What bespoke gate design & manufacture covers

From the first measurement to a fitted, operating gate, the full scope of what we arrange for your entrance.

- **Steel Gate Fabrication**: Steel gates are fabricated to the measured opening, suited to wider or heavier entrances where rigidity and strength are the priority.
- **Aluminium Gate Fabrication**: Aluminium gates are lighter than steel, reducing motor load and eliminating rust, a practical choice for most residential driveways.
- **Wrought Iron Gate Fabrication**: Wrought iron suits period frontages and older properties where the gate detailing needs to match existing boundary ironwork.
- **Automation-Ready Design**: Motor mounting points, hinge specification, and leaf weight are built into the design so the gate is ready for electric operation from the start.
- **Awkward Opening Solutions**: Sloped ground, irregular widths, and unusual post positions are resolved at the design stage rather than worked around on the day of fitting.

- **Opening Width Check**: Measured on site before any fabrication begins.
- **Swing Clearance Check**: Arc and obstruction checks carried out at survey.
- **Ground Level Check**: Slope and clearance measured to shape the gate leaf.
- **Post Condition Check**: Existing posts assessed for suitability before fabrication.

## Why bespoke fabrication starts with a site measurement, not a catalogue

Standard gate sizes rarely match older or irregular entrances, and a gate built to the wrong dimensions causes problems that no amount of adjustment fixes.

Detached homes in Chigwell frequently have entrance widths, post positions, or ground levels that fall outside standard gate sizes. A site measurement covers opening width, ground clearance, swing arc, and post condition, the details that determine whether a gate will hang correctly and operate without binding. Those measurements go directly to fabrication, so the finished gate arrives ready to fit.

Material choice affects weight, finish, and long-term upkeep. Steel suits wider or heavier gates where rigidity matters; aluminium reduces motor load and eliminates rust; wrought iron suits period frontages where the detailing needs to match existing ironwork. Automation compatibility, motor mounting points, leaf weight, and hinge specification, is built into the design rather than considered after the gate is made.

We schedule the site measurement, fabrication, and fitting of the finished gate as one job. That single point of contact means accountability for the gate arriving correctly sized and operating as specified.

[Request a Survey](https://www.chigwellelectricgates.co.uk/contact)

## Why choose us for bespoke gate design & manufacture in Chigwell?

Accountability runs from the first measurement to the finished, operating gate, not just the fitting day.

- **One Point of Contact**: The survey carries through to the fit, so accountability for the gate fitting correctly stays in one place, no handoffs between separate suppliers.
- **DHF & Gate Safe Compliance**: Safety edges and photocells are specified to DHF and Gate Safe standards on every automated gate we arrange.
- **Survey Before Any Fabrication**: Nothing is ordered until the opening has been measured, the ground level checked, and the design confirmed.
- **Groundwork & Wiring Quoted Together**: Post foundations, groundwork, and 18th Edition wiring are quoted as part of the same job, no hidden extras after the gate arrives.
- **One Point of Contact**: We schedule gate surveys across Chigwell and the surrounding Essex area.

## From first enquiry to finished gate in three steps

1. **Describe Your Entrance**: Tell us the opening width, ground conditions, and whether you want manual or electric operation so we can schedule the right survey.
2. **Survey & Specify**: A site visit measures the opening, checks ground level and swing clearance, and confirms material and motor specification.
3. **Fabricate & Fit**: The gate is fabricated to the surveyed dimensions and fitted under the same job, with groundwork and wiring completed at the same time.

[Request a Survey](https://www.chigwellelectricgates.co.uk/contact)

## Typical Bespoke Gate Design & Manufacture Prices

| Job | Typical cost |
| --- | --- |
| Custom gate design and manufacture | £3,500-£8,000 |
| Premium bespoke gate project | £6,500-£14,000 |
| Commercial bespoke gate project | £10,000-£20,000 |

These prices are estimates and often vary with the condition, size and scope of each job. Message us for a free, no-obligation quote.

[See all prices](https://www.chigwellelectricgates.co.uk/pricing)

## Questions about bespoke gate design & manufacture

### Do I need a bespoke gate if my opening is an awkward size?

Yes, a bespoke gate is the right choice for non-standard openings. Standard gates come in fixed widths and heights, so an awkward gap, whether too wide, too narrow, or uneven, will not close or hang correctly with an off-the-shelf option. A gate made to your exact measurements solves this from the outset.

### Will a custom gate be made to fit my exact opening and ground level?

Yes. A bespoke gate is manufactured to the precise width, height, and rake needed for your specific opening and ground profile. Sloped driveways and uneven ground are accounted for during the survey and specification stage, so the finished gate hangs level and closes cleanly.

### Can a bespoke gate be made to suit the style of my house, driveway and boundary?

Yes. Infill pattern, frame profile, finish, and colour are all chosen to complement your property. Whether your boundary is brick, timber, or metal railings, the gate design can be drawn to match the proportions and detailing of what is already there.

### Will a bespoke gate work with the opening method I want?

Yes, provided the opening method suits the space. Swing, sliding, and cantilever configurations are all achievable with a bespoke gate. The design is drawn around your chosen method, and the frame is built with the correct hinge positions, track allowances, or pivot points from the start.

### Is a bespoke gate only suitable for large properties?

No. Bespoke manufacture is just as relevant for a modest terraced driveway as for a large estate. The reason to go bespoke is an opening that does not match standard sizes, a style requirement, or a specific automation need, none of which are exclusive to large plots.

### What is the difference between a custom gate and a standard gate?

A standard gate is made in fixed sizes and a limited range of styles; you adapt your entrance to fit it. A custom gate is drawn and manufactured around your specific opening dimensions, ground conditions, chosen material, and visual style, so nothing needs to be compromised to make it work.

### Would a standard gate be cheaper and quicker than a bespoke one?

A standard gate typically costs less and arrives faster, but only works well when your opening matches the available sizes. If it does not, the savings are lost on adapting the posts or living with a poor fit. For non-standard openings, bespoke manufacture is the more cost-effective route overall.

### Can a bespoke gate be designed so it does not look too heavy or bulky?

Yes. Frame section sizes, infill spacing, and panel proportions are all adjustable. A lighter visual result can be achieved by using slimmer hollow-section steel, open bar spacing, or aluminium rather than solid timber, while still meeting the structural requirements for the span and automation load.

### Which areas do you cover for Bespoke Gate Design & Manufacture?

We cover Bespoke Gate Design & Manufacture in and around Chigwell, including Buckhurst Hill, Loughton, Abridge, Theydon Bois, Epping, Upminster and Gidea Park. If your area isn’t listed, [send us a quick message](https://www.chigwellelectricgates.co.uk/contact) to check.

## Tell Us About Your Entrance

Describe the gate, driveway, and access you need and we’ll schedule a survey and quote the full job, including groundwork and wiring.

[Request a Survey](https://www.chigwellelectricgates.co.uk/contact)

## Business details

### Contact

- **Email**: [contact@chigwellelectricgates.co.uk](mailto:contact@chigwellelectricgates.co.uk)
- **Based in**: Chigwell, Essex, IG7 6NX
- **Enquiries**: [Send an enquiry](https://www.chigwellelectricgates.co.uk/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00
