Cantilever Gate Systems Questions

They typically cost more because the system needs additional support hardware, carriages, a heavier post, and a counterbalance section. The exact difference depends on gate width, weight, and ground conditions at your entrance.

The gate needs run-back space of roughly one and a half times the opening width, which rules it out on tight plots. The support post and carriage assembly can also look bulkier than a simple tracked gate on a narrow entrance.

A gate that drags or jams puts repeated strain on the motor, which can burn out the operator. Continued use on a misaligned track also wears the rollers unevenly, turning a straightforward swap into a more involved repair.

Sticking, dragging, and misalignment are the most frequent issues. On tracked systems, the cause is usually debris in the rail, worn rollers, or a settled track. Cantilever systems remove the ground track, which eliminates the most common source of these faults.

Cantilever systems are well suited to wider openings because the counterbalance overhang keeps the gate level without a heavy ground rail. The exact maximum depends on gate weight and material, a site survey will confirm what is achievable for your entrance.